Kenmore Dryer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Kenmore Dryer Parts
- Drum Not Spinning
- Heat stays on after drum has stopped
- Noisy
- See more...
- Heat stays on after drum has stopped
- Not Heating
- Too hot
- See more...
Not knowing what the problem was I started looking at the coils and could not see any broken parts.
So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading.
I replaced with a new one and put it all back together the way I took it apart.
Then I plugged it in and it worked first time, I now have warm dry clothes. Read more...
- Heat stays on after drum has stopped
- Not Heating
- Too hot
- See more...
To remove the heating element there are two small nut-head screws. Remove the two electric wires. Then you can pull the heating element away.
You can check the heating element with an ohm-meter or visually inspect it to see if the heating element spiral wire is broken.
Don't hurry to dispose the old element. My model includes a small electric safety part. You'll need to transfer it to the new heating element (that comes without it)..
Good luck. Read more...
- Drum Not Spinning
- Marks left on clothes
- Noisy
- See more...
- Drum Not Spinning
- Marks left on clothes
- Noisy
- See more...
- Door won’t close
- Marks left on clothes
- See more...
- Marks left on clothes
- Noisy
- See more...
- Marks left on clothes
- Noisy
- See more...
- Marks left on clothes
- Noisy
- See more...
2. pop off top of unit
3. remove front of dryer
4. lay unit on its back
5. remove drum and replace pulley assembly,belt,drum rollers of which it has 2 rear and 2 front
6. reverse above and then remove filter-vent housing and scrape off old seal install new seal
7. re-connect power,gas and vent use again
8. only sad part to whole job was seeing how cheaply whirlpool now makes thier products Read more...
- Heat stays on after drum has stopped
- Not Heating
- Too hot
- See more...
Kenmore Dryer Appliance Types
Related Kenmore Dryer Parts
- Kenmore Dryer Belts
- Kenmore Dryer Wheels and Rollers
- Kenmore Dryer Thermostats
- Kenmore Dryer Elements and Burners
- Kenmore Dryer Filters
- Kenmore Dryer Fuses
- Kenmore Dryer Pulleys
- Kenmore Dryer Drums and Tubs
- Kenmore Dryer Hardware
- Kenmore Dryer Latchs
- Kenmore Dryer Sensors
- Kenmore Dryer Seals and Gaskets
- Kenmore Dryer Switches
- Kenmore Dryer Doors
- Kenmore Dryer Lights and Bulbs
- Kenmore Dryer Handles
- Kenmore Dryer Motors
- Kenmore Dryer Circuit Boards and Touch Pads
- Kenmore Dryer Valves
- Kenmore Dryer Fans and Blowers
- Kenmore Dryer Caps and Lids
- Kenmore Dryer Wire Plugs and Connectors
- Kenmore Dryer Timers
- Kenmore Dryer Hinges
- Kenmore Dryer Knobs
- Kenmore Dryer Ducts and Vents
- Kenmore Dryer Brackets and Flanges
- Kenmore Dryer Springs and Shock Absorbers
- Kenmore Dryer Hoses and Tubes
- Kenmore Dryer Panels
Popular Kenmore Dryer Models
Below are the most popular Kenmore Dryer models we have. Enter your model number in the search box to find your model.