LG Washer Dryer Combo Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular LG Washer Dryer Combo Parts
Your Price
$54.28
On Order
LG Washer Dryer Combo Dryer Lint Filter
PartSelect Number PS3531962
Manufacturer Part Number ADQ56656401
The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Special details: When replacing lint screen ADQ56656401 you may need to also replace lint screen housing MCK49049101 and lint screen guide MEA49050001 to prevent items from catching on the lint screen, depending on your model.
Fixes these symptoms
- Door won’t close
- Marks left on clothes
- See more...
Installation Instructions
David from Annapolis, MD
Filter parts chipped - replaced
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw.
Read more...
Your Price
$31.27
In Stock
LG Washer Dryer Combo Dryer Drum Belt
PartSelect Number PS11705916
Manufacturer Part Number 4400EL2001F
The belt wraps the length of the dryer drum, secured by a tension pulley and then loops around the motor pulley. If you find that the drum is not turning properly or at all while your dryer is in succession, it might be due to the belt being broken.
Fixes these symptoms
- Drum Not Spinning
- Noisy
- See more...
Installation Instructions
Arthur from SOUTHLAKE, TX
Noisy when drying. A bumping noise
Watched the video a couple of times. After that it was a breeze.
Read more...
Your Price
$44.28
In Stock
LG Washer Dryer Combo Lint Screen Housing
PartSelect Number PS3534930
Manufacturer Part Number MCK49049101
This is an authentic dryer lint filter cover sourced directly from the manufacturer. It protects the more delicate lint filter in your dryer, so that it doesn’t get damaged and lint can’t mix in with your clothes. This product is gray in color and is made of plastic. It is sold individually. The manufacture has modified the part and suggests replacing the filter guide also. Please see your specific model information to locate the filter guide.
Fixes these symptoms
- Door won’t close
- Marks left on clothes
- See more...
Installation Instructions
David from Annapolis, MD
Filter parts chipped - replaced
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw.
Read more...
Your Price
$24.28
In Stock
LG Washer Dryer Combo Magnetic Door Plunger
PartSelect Number PS3618292
Manufacturer Part Number AGM73610701
This magnetic door plunger, also known as the magnet holder, is built for your washer. When you order this part, you will receive the plastic housing and a spring that goes with it. The magnetic door plunger attaches to the inner door panel of the washer. It holds the door open when the washer is not running, and allows the door and tub seal to dry. This prevents mold and mildew from building up. Occasionally, the plastic tabs on the housing can break, and when this happens the part will need to be replaced. You may also notice that your washer lid or door will not close; this can also be a sign of a damaged magnetic door plunger.
Fixes these symptoms
- Leaking
- Lid or door won’t close
- Will Not Start
- See more...
Installation Instructions
Omnitech from Warrenville, IL
Door would not close
There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replace the magnet was $18. Instructions were included in the box. Part number on the drawing was A165. PS3618292 Magnetic Door Plunger
Read more...
Your Price
$42.84
In Stock
LG Washer Dryer Combo Filter Guide
PartSelect Number PS3535278
Manufacturer Part Number MEA49050001
This is a replacement lint screen guide for your dryer. The lint screen guide attaches to the front bulkhead and supports the lint screen. If your lint screen will not stay in place, or if you are noticing marks left on your clothes, a broken lint screen guide could be to blame. The lint screen guide is approximately 13 inches wide on its straight edge. It is made of plastic and is sold individually. This is an OEM part, directly from the manufacturer.
Fixes these symptoms
- Door won’t close
- Marks left on clothes
- See more...
Installation Instructions
David from Annapolis, MD
Filter parts chipped - replaced
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw.
Read more...
Your Price
$30.01
In Stock
LG Washer Dryer Combo Pulsator Cap
PartSelect Number PS3525704
Manufacturer Part Number 5006EA3009B
This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.
Fixes these symptoms
- Will not agitate
- See more...
Installation Instructions
Kristen from Safford, AZ
Washer pulsator was coming loose during wash cycle.
Since the old pulsator had actually come off during a wash cycle, I was able to place the new one on easily. Tightened the screw with a socket. Then placed the new cap on. Before placing the new pulsator on, I was able to clean all the mold and hard deposits off the mechanism under the pulsator. The hard deposits were also scrapped from the pulsator holding (where the screw goes) which may have caused the problem to begin with.
Read more...
Your Price
$197.69
In Stock
LG Washer Dryer Combo Washer Drain Pump Assembly
PartSelect Number PS11706439
Manufacturer Part Number 5859EA1004P
This drain pump is for washers. Drain pump removes water from the washer during the drain portion of the cycle. Unplug the washer before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
- Leaking
- Will not drain
- See more...
Installation Instructions
Jesus from El Paso, TX
It did not drain water, cycle stops at rinse+spin.
1-Take water off manually. 2- Take machine to back yard. 3- lay machine 45 degrees. 4- Located water bump, (rear left side). 5-removed drain black hoses with hand. 6-removed 3 screws from bump frame. 7-Taker off all unit and marked down cable position at plug. 8- installed new pump. 9- Reverse all steps. Note: I did not use new cable supplied with the new bump, I did not want to mess around on mother board connections, I kept old wire harness which are only two cables blue and gray. It took me less than 30 minutes.
Read more...
Your Price
$53.22
In Stock
LG Washer Dryer Combo FILTER ASSEMBLY,LINT
PartSelect Number PS16546780
Manufacturer Part Number ADQ56656403
This is a lint filter assembly for your dryer. This dryer lint filter is an OEM part with a plastic frame and mesh filter that measures approximately 11 inches wide by 11-inches long. Dryer lint filters are designed to catch and hold any excess fabric and dust floating around in the dryer drum. Dryer filters can crack, rip, and break over time, resulting in lint getting into the exhaust and becoming a fire hazard, which is why it is important to replace when you notice any damage. This filter is sold by itself and does not come with any other accessories.
Your Price
$63.71
In Stock
LG Washer Dryer Combo BEARING,BALL
PartSelect Number PS7785069
Manufacturer Part Number 4280EN4001C
The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, there could be an issue with the tub bearing. This genuine OEM replacement bearing has a 3-inch outer diameter, and is used to help the tub spin smoothly and to stop the washing machine from shaking during the cycle.
NOTE: This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly at the same time.
Fixes these symptoms
- Burning smell
- Noisy and Marks Left on Clothes
- Spinning Issues
- See more...
Installation Instructions
Todd from STOCKTON, KS
Bearing seal out causing bearings to get wet and very noisy
Watched a short video to figure out to remove panels. After panels were off I removed as much as I could from the inside of the machine. This was not completely necessary however for an extra half hour it made inspection, cleanup and removal of tub housing out the front of the machine much easier. Once out, I split the two halves of the outer basin and sprayed the spider shaft with penetrating oil. Using a brass drift I did have to get a bit aggressive to drive spider shaft out, then I used a heavy metal punch to hammer out the bearings. For those who may not know using brass or a soft metal will keep from damaging reusable parts. At this point it was cleanup time, with dish soap I scrubbed the two halves of the outer basin and the wash basin itself then used emery cloth on the bearing casing and spider shaft. I am a firm believer if u take the time to cleanup properly things go back together much easier. At this point I began to reassemble, replacing tub bearings and seal, the wash basin then putting the two halves of the outer basin back together. I strongly recommend replacing gasket for the halves of the outer basin, for as much as it takes to get there it is money well spent to up the chances of a leak free system. Now with the wash tub back together it was time to reset the tub and hook everything back up. I skipped a lot of steps but if a person pays attention, takes pictures if they have to, even numbers lines with a sharpie it is a very easy repair. Very easy but very time consuming. I am DIY’er, in all I spent about ten hours over two days to do this job. Thus being said I am very particular spent a lot of time cleaning, scrubbing looking at as many wear points and checking for rubbed wires. Hope this helps someone out there, definitely not a strong writer or like doing it. Oh one other thing, I ordered the shocks on the bottom side of wash tub just because I guess not thinking they were bad just thinking I could help tune it up. Was surprised to find the old ones were completely shot, was glad I ordered new ones. After repairs, noise is gone and machine is quiet again. Thank you, your website is very easy to find parts and order.
Read more...
Your Price
$126.23
In Stock
LG Washer Dryer Combo Washer Water Inlet Valve
PartSelect Number PS12374721
Manufacturer Part Number AJU75152601
This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stopping in the middle of a cycle, you may need to replace the water inlet valve. Be sure to disconnect the power and water supply before you begin this repair.
Fixes these symptoms
- Leaking
- No hot or cold water
- Water Filling Issues
- See more...
Installation Instructions
Ronald from MOUNTAIN HOME, AR
convert from natural gas orfice to LP gas orfice
I did not do the repair I hired the propane company to do it . It was too difficult for me.they removed top & front of dryer .removed & replaced gas orfice reinstall all parts that were removed. Install and test dryer IT cost me $91.59 for labor & $24.65 for the part & shipping.If the dryer had a side access near the gas valve it could have saved me the cost of labor. I could have done it myself.
Read more...
LG Washer Dryer Combo Appliance Types
Popular LG Washer Dryer Combo Models
Below are the most popular LG Washer Dryer Combo models we have. Enter your model number in the search box to find your model.
- DLE1101W 7.3 Cu. Ft. Ultra Large Capacity Dryer With Sleek Contemporary Design (Electric)
- DLEX3570V 5.3 Total Capacity Lg Twinwash Bundle With Lg Sidekick And E
- WM3997HWA 4.3 Cu. Ft. All-In-One Washer And Dryer Combo.
- WM3997HWA LAUNDRY CENTER
- WM3997HWA LAUNDRY CENTER
- DLEX3570W 5.5 Total Capacity Lg Twinwash Bundle With Lg Sidekick And E
- WM3455HW 24-Inch Compact Washer / Dryer Combo
- DLGX3571W 5.3 Total Capacity Lg Twinwash Bundle With Lg Sidekick And G
- WM3477HW FRONT LOADING COMBO
- DLE3500W Washer-Dryer
- WM9000HWA 6.2 Total Capacity Twinwash Bundle With Sidekick And Electri
- WM3488HW 2.3 Cu.Ft. Compact All-In-One Washer/Dryer
- DLEX3700V Washer-Dryer
- WM1377HW 24-Inch Compac Washing Machine
- DLE7300WE 27 Inch Smart Electric Dryer With Easyload
- DLGX3701V Washer-Dryer
- DLG3501W Washer-Dryer
- DLE3400W Washer-Dryer
- DLEX3700W Washer-Dryer
- DLGX3701W Washer-Dryer
