MTD Edger Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular MTD Edger Parts
Your Price
$20.99
In Stock
MTD Edger Fuel Tank Assembly W/Fuel Lines Incl. 29
PartSelect Number PS11812933
Manufacturer Part Number 753-06797
The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.
Your Price
$4.99
In Stock
MTD Edger Chute Flange Keeper
PartSelect Number PS10005747
Manufacturer Part Number 731-0851A
This chute flange keeper is sourced from the original equipment manufacturer for use in snowblowers. The plastic keeper allows the snowblower chute to pivot, and secures the flange that connects the chute to the blower frame and holds it in place during use. Over time the flange keeper can break or fall off, which causes the chute to dislodge or shift from its position. If you notice that debris is discharged in the wrong direction, and you have difficulties adjusting the chute then this is a sign that the flange keeper is no longer functioning as it should. Clean the chute flange and surrounding area before placing the new keeper on. Use a pair of pliers to align the the holes on the flange keeper with the holes on the chute and lock it in place.
Your Price
$3.99
In Stock
MTD Edger Shear Bolt 5/16-18 x 1.5
PartSelect Number PS10001820
Manufacturer Part Number 710-0890A
This is a shear bolt, also known as a snap-off bolt. This is a fastener designed to break under a specific amount of pressure and protect the machine it is installed on from that excessive load. In lawn equipment, the shear bolts typically connect the auger or blade to the drive shaft. Therefore, if the bolt snaps, the auger gets jammed and cannot rotate so that it will not damage the rest of the unit. This bolt has a diameter of 5/16 inches, with 18 threads per inch, and is 1.5 inches long. To remove the shear bolt from your machine, you need to turn the power off first. With pliers or a wrench, grip onto the broken end of the bolt and twist it gently out of its hole. If it is stuck, you may need to coat the bolt with a penetrating oil or tap the bolt out with a mallet. Since this authentic OEM part is sold individually, refer to your instruction manual so that you can purchase the correct number of bolts for your machine.
Your Price
$3.99
In Stock
Your Price
$24.15
In Stock
MTD Edger Bearing .62" I.D. x 1.38" O.D. x .437" Thk.
PartSelect Number PS9167498
Manufacturer Part Number 941-0155
This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised of steel and rubber.
This bearing allows the input shaft to rotate freely inside the gear box, and over time can become worn or damaged. You will know your bearing is damaged if it is making a growling, grinding, or squealing sound. This is an easy repair, and requires a bearing puller tool to carry out.
Locate the bearing inside the gear box on each end of the input shaft, ensuring you have confirmed this is the part you need by verifying your model number or using your owners manual.
Your Price
$3.99
In Stock
Your Price
$9.34
In Stock
MTD Edger Blade
PartSelect Number PS9129938
Manufacturer Part Number 781-0080-0637
This Edger Blade is a black, metal blade which is sold individually and comes certified from the manufacturer. Installation is rated as "Easy" and requires a socket set and wrench set. This blade attaches to the drive shaft and is used for edging the grass around driveways and walkways. If this part becomes worn/fatigued/damaged (which may happen after hitting the pavement) you will notice an odd vibration and poor trimming, at which time the part should be replaced.
Your Price
$3.99
In Stock
MTD Edger Jamlock Nut, 3/8-16
PartSelect Number PS9299545
Manufacturer Part Number 712-0266A
The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replaced. This is an authentic part authorized by the manufacturer.
Your Price
$17.53
In Stock
MTD Edger Cable-Wheel Adjust
PartSelect Number PS9179266
Manufacturer Part Number 946-04036
This wheel adjustment cable is used for both lawn edgers and trimmers and measures 32.75-inches in length. Featuring a metal cable insulated with rubber, this cable is used to raise or lower the blade within your equipment to control the cutting depth and is connected to a lever near the handle. Depending on your model, the installation instructions may vary, so check your user manual or any relevant diagrams for assistance.
Your Price
$27.39
In Stock
MTD Edger Lawn Mower Ground Drive Belt
PartSelect Number PS9172714
Manufacturer Part Number 954-04032B
3/8 x 36-1/8-inch
This ground drive belt (part number 954-04032B) is for lawn mowers.
Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels.
Wear work gloves to protect your hands when installing this part.
MTD Edger Appliance Types
Related MTD Edger Parts
- MTD Edger Bearings
- MTD Edger Blades
- MTD Edger Control Cables
- MTD Edger Handles
- MTD Edger Seals and Gaskets
- MTD Edger Springs and Shock Absorbers
- MTD Edger Transmissions and Clutches
- MTD Edger Wheels and Rollers
Popular MTD Edger Models
Below are the most popular MTD Edger models we have. Enter your model number in the search box to find your model.
- 596 Edger
- 596 Edger
- 551 Edger
- 604 Edger
- 251586 Edger
- 599 Edger
- 251-586-701 Edger/Snowthrower
- 251-586-105 Edger/Snowthrower
- 251-586-105 Edger/Snowthrower
- 251-586-105 Edger/Snowthrower
- 251-586-105 Edger/Snowthrower
- 251-586-701 Edger/Snowthrower
- 251-586-701 Edger/Snowthrower
- 251-586-701 Edger/Snowthrower
- 251-586-105 Edger/Snowthrower
- 251-586-105 Edger/Snowthrower
- 251-586-105 Edger/Snowthrower
- 251-586-105 Edger/Snowthrower
- 251-586-105 Edger/Snowthrower
- 251-586-701 Edger/Snowthrower
