Murray Lawn Tractor Parts

Murray Appliance Parts

Popular Murray Lawn Tractor Parts

Your Price
$4.99
   In Stock
Murray Lawn Tractor Pin, Shear, 1-3/4
PartSelect Number PS9999468
Manufacturer Part Number 703063
Shear Pins are designed to break off in order to prevent further damage to your machine. Because they are designed to break, we recommend having a few spares on hand. This part is made of metal, is silver, is not part of a kit or assembly, and is sold individually. A Shear Pin will break when you hit a large chunk or ice or other debris. Once it is broken, it will need to be replaced. You will need pliers to complete this repair. Customers rate this repair as Easy.
Your Price
$3.99
   In Stock
Murray Lawn Tractor Cap Axle Black 1 50 x 1 00
★★★★★
★★★★★
1 Review
PartSelect Number PS9007667
Manufacturer Part Number 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debris can freely enter the axle and hub, causing damage. This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side. Read more...
Your Price
$3.99
   In Stock
Murray Lawn Tractor Ring Klip Number T5304-75
★★★★★
★★★★★
1 Review
PartSelect Number PS9143890
Manufacturer Part Number 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.
Installation Instructions
Anthony from OLIVEHILL, TN
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side. Read more...
Your Price
$4.99
   In Stock
Murray Lawn Tractor Cotter Pin
PartSelect Number PS9999599
Manufacturer Part Number 703312
This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.
Your Price
$48.56
   In Stock
Murray Lawn Tractor Mandrel Assembly
★★★★★
★★★★★
2 Reviews
PartSelect Number PS12087499
Manufacturer Part Number 587819701
Your Price
$21.82
   In Stock
Murray Lawn Tractor Filter--Air Cleaner Cartridge
PartSelect Number PS9137470
Manufacturer Part Number 793569
Your Price
$3.99
   In Stock
Murray Lawn Tractor Bolt, Carriage
PartSelect Number PS9999542
Manufacturer Part Number 703185
Your Price
$5.99
   In Stock
Murray Lawn Tractor Nut-Hex 5/16-18
PartSelect Number PS9999668
Manufacturer Part Number 703409
This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten using a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.
Your Price
$14.93
   On Order
Murray Lawn Tractor Switch-Ign
★★★★★
★★★★★
2 Reviews
PartSelect Number PS9020864
Manufacturer Part Number 532193350
This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various functions including starting, stopping, running and reversing. The switch works by connecting/disconnecting the circuit between the battery and the ignition system. The switch can fail either from physical damage or faulty electrical wiring. If the ignition switch is no longer working, you will not be able to operate your equipment. To access the faulty switch, first disconnect the battery, and wiring harness. Squeeze the tabs on the sides of the switch and pull it out from its mounting position. Plug the new switch in place and ensure that the tabs are engaged. Finish the repair by reconnecting the wiring harness and battery. If your current key is in good working condition, you can continue to use it. However, if it is not, it is recommended to replace the key at the same time. Each ignition switch is sold individually.
Fixes these symptoms
Installation Instructions
Russell from MACON, GA
Dryer runs no heat
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats. Read more...
Your Price
$7.59
   In Stock
Murray Lawn Tractor Knob, 5/16-18 Wing (Black)
★★★★★
★★★★★
4 Reviews
PartSelect Number PS9999469
Manufacturer Part Number 703065
This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

Murray Lawn Tractor Appliance Types

Related Murray Lawn Tractor Parts

Popular Murray Lawn Tractor Models

Below are the most popular Murray Lawn Tractor models we have. Enter your model number in the search box to find your model.