Troy-Bilt Tiller Parts

Fuel Tank Assembly W/Fuel Lines Incl. 29 – Part Number: 753-06797

Your Price

$20.99

Troy-Bilt Tiller Fuel Tank Assembly W/Fuel Lines Incl. 29

★★★★★

1 Review

PartSelect Number PS11812933

Manufacturer Part Number 753-06797

The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.

Your Price

$11.22

Troy-Bilt Tiller Throttle Cable

★★★★★

1 Review

PartSelect Number PS10009725

Manufacturer Part Number 753-06831

Carriage Bolt, 5/16-18 x .75 – Part Number: 710-0451

Your Price

$3.99

Troy-Bilt Tiller Carriage Bolt, 5/16-18 x .75

PartSelect Number PS10001568

Manufacturer Part Number 710-0451

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063

Your Price

$3.99

Troy-Bilt Tiller Nut, Flange Lock, 5/16-18, Grf

PartSelect Number PS9092936

Manufacturer Part Number 712-04063

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

Cable Barrel Holder – Part Number: 946-0605

Your Price

$4.99

Troy-Bilt Tiller Cable Barrel Holder

★★★★★

1 Review

PartSelect Number PS9167431

Manufacturer Part Number 946-0605

This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to secure the clutch control handle and cable together. This holder is made of durable plastic and can replace the old holder by simply removing it, inserting the cable into the new holder, and tightening it until it is locked in place.?

Your Price

$3.99

Troy-Bilt Tiller Air Filter

PartSelect Number PS9117898

Manufacturer Part Number 753-05996

Bearing .62" I.D. x 1.38" O.D. x .437" Thk. – Part Number: 941-0155

Your Price

$24.15

Troy-Bilt Tiller Bearing .62" I.D. x 1.38" O.D. x .437" Thk.

PartSelect Number PS9167498

Manufacturer Part Number 941-0155

This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised of steel and rubber. This bearing allows the input shaft to rotate freely inside the gear box, and over time can become worn or damaged. You will know your bearing is damaged if it is making a growling, grinding, or squealing sound. This is an easy repair, and requires a bearing puller tool to carry out. Locate the bearing inside the gear box on each end of the input shaft, ensuring you have confirmed this is the part you need by verifying your model number or using your owners manual.

Bell. Wash. .340 I.D. x .872 O.D. – Part Number: 736-0242

Your Price

$4.99

Troy-Bilt Tiller Bell. Wash. .340 I.D. x .872 O.D.

PartSelect Number PS10006541

Manufacturer Part Number 736-0242

Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damaged, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.

Throttle Box Ass'y – Part Number: 831-0823A

Your Price

$33.45

Troy-Bilt Tiller Throttle Box Ass'y

★★★★★

2 Reviews

PartSelect Number PS10017243

Manufacturer Part Number 831-0823A

The Throttle Box Assembly, or the Throttle Assembly, is a kit that includes the housing, handle, and hardware. It is black and constructed of steel and plastic. It can be installed onto the right hand upper handle, using a screwdriver and pliers, and is rated as Medium difficulty to install. This kit contains the parts that control the amount of the air and fuel entering the engine. When the part breaks (likely due to fatigue) you will no longer be able to control the engine. If nothing happens when you move the handle, that means it has become disconnected. When the part is broken it must be replaced. Check your model number to ensure you are selecting the correct replacement part.